The Wall Gallery
  • Home
  • FAQ
  • Ideas
    • Metallics
    • Minerals
    • Concrete
    • Oxidation - Ironic
    • Mat - Celestia
    • Wall2Floor
  • Contact

Frequently Asked Questions

Can I apply the textured paint onto floor tiles instead of the wall?
Yes, we have a special Wall2floor range to help you achieve a homogeneous look from the wall to floor. Additional charges apply for the waterproofing and finishing coat. Please enquire within.
What kind of surface can I apply the textured paint on?
MDF, plywood, gypsum, plaster board, and cement are acceptable. For application on smooth surfaces such as acrylic panels, additional charges apply for surface preparation. Please enquire within.
Will the paint have any major cracks?
We put a lot of emphasis on the surface preparation to ensure the quality of work. For example, painting over panel boards that have joining such as modular plaster boards will require additional reinforcement by adding mesh and plaster adhesive to secure the panels during surface preparation. Please consult with our team for more information.
What colours do you have?
Please download our digital brochures on our website for colour reference. Alternatively, you may provide us a colour chart from any major paint brands and we will match your preferences with our colour codes for you.
Do you provide warranty?
Yes we provide manufacturer's warranty with official certification. 10 years for interior paints and 5 years for exterior paints. Please contact our team if you require a copy for your project.
Can you complete the job in one day for small areas?
No, we normally require 3 working days even for small projects so that we provide sufficient drying and curing time to achieve high consistency in our quality of service. The first day is reserved for surface preparation, the second for the primer and the third day for finishing coat and touch up work.
What is your minimum ordering quantity?
The MOQ is 200sft, otherwise we will bill by lump sum.
Is skim coat required for surface preparation?
Skim coat helps to smoothen out any bumps on the wall during surface preparation. We encourage applying skim coat for best results because the consistency of the textured paint is also dependent on a smooth bonding substrate. It costs an additional RM 3 psf.
How do you control the colour accuracy for big projects?
For commercial projects, we can provide sample mock up boards for colour confirmation before we start work.
Do you service outstation projects outside the Klang Valley?
Yes, kindly contact us for the outstation fees. We encourage you to plan in advance for your project as we provide this service on a first come and first served basis.

Location

FIND US

​The Wall Gallery
3, Jalan Damai Ukay 1,
Medan Damai Ukay,
Taman Pinggirian Ukay,
68000 Ampang, Ulu Kelang, Selangor,
MALAYSIA.

Contact Us

Mon to Fri 9AM to 6PM
​H: 012 202 6894
T: 03 4256 7929
F: 03 4299 8929

Co Reg: 918804-T 
© 2019 The Wall Gallery Sdn Bhd
  • Home
  • FAQ
  • Ideas
    • Metallics
    • Minerals
    • Concrete
    • Oxidation - Ironic
    • Mat - Celestia
    • Wall2Floor
  • Contact